Fleece-Lined Headgear Strap Covers

Category: mask-headgear

Commercial facts

Description

Fleece-Lined Headgear Strap Covers wrap the headgear straps in fleece so the strap sits on the cheek and temple through fabric rather than directly on skin. They are the cheapest way to take pressure marks and strap rub out of a mask setup without changing the mask.

Key features

• Takes pressure off the skin - The part wraps the strap or the cushion in soft fabric, so headgear load is spread over a wider area instead of concentrating on the same few square centimetres every night.
• Washable and reusable - Cold gentle cycle and air dry. Reusable fabric is the reason buyers choose this over single-use alternatives.
• Steady under a pillow - A low-profile construction so it stays comfortable when the user sleeps on their side, which is when bulk becomes a complaint.
• No adhesive and no clips - Nothing that can catch on hair or on the mask frame - the part simply slides onto the strap it is made for.
• Sized to your headgear - Send the strap or cushion it is built for and we will cut the sleeve to that geometry rather than to a generic size.

Product specification

Commercial terms

The problem this part solves

Headgear straps are tensioned to hold a seal, so they press on the same few square centimetres of face night after night. That concentrated pressure is what shows up as marks and sore points in the morning.

Wrapping the strap spreads that load over a wider, softer area and puts a washable fabric between the strap and the skin.

Construction and materials

The sleeve is fleece with a brushed inner face, sewn as a closed tube so there is no seam edge against the face. It slides over the existing strap and stays where it is put.

There is no adhesive, clip or hook tape on the part, so nothing can catch on hair or on the mask frame.

OEM and ODM options

Made to order on: length and width, fleece weight and colour, closure type if a wrap-around format is preferred, then label and packaging.

Common retail formats are a pair on a header card or a four-pack; both are produced to order.

Sourcing and ordering

MOQ: varies by product, size and colour - all quantities negotiable. Typical bands for this family run from 100 to 1000 pcs.

Lead time: varies by product and order size - confirmed in your offer and negotiable. Rush orders can be arranged.

Send us your target specification, quantity and market, and we will come back with pricing and a production plan.

CPAP Hose Cover is the sleep-therapy accessory line of a Shenzhen manufacturer with 16 years in hook-and-loop and soft-goods production, supplying OEM/ODM programmes for distributors, sleep clinics and therapy brands worldwide.

Frequently asked questions

Will they change the fit of my mask?

The sleeve adds a thin fleece layer under the strap, so headgear is usually adjusted very slightly. It does not alter the mask cushion or the seal itself.

Do they stay in place overnight?

A closed fleece tube grips the strap along its length rather than at one point, so it stays where it is positioned through the night.

Are they washable?

Yes - machine washable on a cold gentle cycle and air dried, the same care as the hose covers.

Can the part be cut to our own geometry?

Yes. These parts are cut to the strap, cushion or tube they are designed for, so the geometry comes from your specification, and the exact dimensions are fixed on the approved sample.

What compliance documentation can you supply?

Materials can be supplied with REACH and RoHS test reports on request, and the factory operates an ISO 9001 quality system.

Why source this product with us

• Factory-direct pricing - Buy from the manufacturer rather than a trading company, with no middleman markup on sleep-therapy accessories.
• One-stop customisation - Closure, dimensions, fleece weight, colour and packaging handled from sample to mass production in a single factory.
• Low-risk trial - A flexible first order and 1-10 pcs pre-production samples, so you can validate the market before committing to a programme.
• Verified compliance - An ISO 9001 quality system and materials that can be supplied with REACH and RoHS test reports on request. Hose covers are comfort accessories, not medical devices: they need no prescription and do not alter therapy pressure.
• Reliable delivery - On-time production schedules, EXW / FOB / DDP terms, and a reply to every enquiry within 24 hours.

Who it is for: therapy brands, sleep clinics and distributors building a mask comfort range.

B2B buyer's guide: sourcing mask and headgear comfort parts

Comfort parts are the most frequently reordered items in a therapy accessory range. These are the points that decide whether they sell or sit.

• Thickness is a specification, not a preference - A liner has to sit under a seal without lifting it. Too thick and the mask leaks; the right thickness is set by the cushion it is used with, so it must be agreed at sampling.
• Fit the range you already support - Comfort parts are cut to a specific strap or cushion geometry. Telling us which mask families your programme covers is the first and most useful input.
• Multi-packs drive repeat orders - Pairs and four-packs are how these parts are merchandised. The pack count is a commercial decision that also fixes the header card size.
• Washability is the retention argument - Fabric parts that survive repeated washing justify their price against single-use alternatives, so the fleece weight and binding need to be chosen for laundering.

How ordering works

1. Send your requirement - Tell us the product, quantity, target market, branding and packaging. Include your artwork if you have it - the enquiry form on this page reaches our export team directly.
2. Quotation and specification - We reply within 24 hours with a quotation, MOQ and a written specification so both sides work from the same document. Pricing is quoted per project and confirmed in writing.
3. Samples before production - We supply 1-10 pcs pre-production samples, typically in 5-7 days. Nothing goes to mass production until you approve the sample in writing.
4. Production and quality control - Multi-point in-line and final inspection against the approved sample, with an inspection report issued before shipment.
5. Shipment and documentation - We arrange EXW, FOB or DDP terms with the freight and customs documentation your market needs, and send shipping documents as soon as the goods are loaded.
6. Repeat orders - Your approved sample and specification are kept on file, so repeat orders are produced to the same standard without restarting development.

Customisation and private label

• Logo and branding - Woven labels, printed logos, embroidery, heat transfer and custom hangtags.
• Private label - The product ships under your own brand, with your artwork on the product and the packaging.
• Colour and material - Colour matching to your palette, and fleece weight, pile or lining upgrades where the specification calls for them.
• Dimensions - Length, diameter and closure position made to your measurement rather than to a standard cut, including sizes outside this range.
• Packaging - Polybag, header card, retail box or carton configuration to your requirement, including barcodes for retail and clinic-pack labelling.

Send your specification through the enquiry form and our export team will come back within 24 hours with pricing, MOQ and a production plan.

Request a Quote