Cat-Proof Heavy Fleece Hose Cover
Category: hose-covers
Commercial facts
| Price | Negotiable, quoted per project |
|---|---|
| MOQ | Varies by product, inquire for exact quantity |
| Customization | OEM / ODM |
| Lead time | Confirmed per project, rush orders negotiable |
Description
A heavier fleece sleeve built as a physical barrier as well as an insulator. Cats and dogs scratch and chew at the tube, and this cover puts a thick soft layer between the animal and the tube wall, where a standard cover puts a thin one.
Key features
- Fits the tube, not the machine - Each cut is sized to a run length and a tube outside diameter, with a small excess so the tube can bend inside the sleeve instead of pulling the cover tight.
- Passive condensation control - The fleece slows heat loss along the tube so less moisture condenses in the low points of the run - the effect users notice as less gurgling near the mask.
- Closure you can fit in seconds - The zipper or hook-and-loop closure means the cover goes on with the tube already connected to the machine, which is how most users actually fit it.
- Machine washable - Cold gentle cycle and air dry. The sleeve keeps its pile and its colour across repeated washes, which matters for a part that is laundered regularly.
- Noise and contact comfort - It takes the plastic-on-fabric rattle out of the tube and keeps dust and pet hair off the surface it touches.
Product specification
| Cover length | 6 ft (1.83 m) finished, cut with excess for bends |
|---|---|
| Fits tube | Standard 22 mm outside diameter |
| Closure | Full-length zipper over a heavier fabric edge |
| Fabric | Heavier double-sided polyester fleece than the standard cut |
| Finish | Bound long edge with a reinforced stitch on the heavier fabric |
| Colour | Grey as standard; other colours matched to a supplied swatch |
| Care | Machine washable, cold gentle cycle, air dry |
| Packing | Poly bag, header card, retail carton or bulk carton made to order |
Commercial terms
| MOQ | Set per programme - varies by product family and customisation level |
|---|---|
| Customization | Logo, colour, size, material, packaging |
| Samples | 1-10 pcs pre-production; sample cost refundable against the first bulk order |
| Trade terms | EXW / FOB / DDP on request |
What it actually protects against
Pet damage to tubing is one of the most common reasons a tube is replaced before it wears out. A heavier fleece layer absorbs claws and teeth far better than a thin sleeve, and it hides the tube surface so pets tend to lose interest in it.
It also keeps dust, hair and sunlight off the tube, which extends the life of the polymer itself.
Heavier fabric, same care routine
The heavier fleece costs a little more in material and needs a reinforced stitch along the edge so the heavier fabric does not pull away from the closure.
It still washes on the same cold gentle cycle and air dries flat. The extra weight does mean it needs slightly more room to dry.
OEM and ODM options
Fabric weight is the defining variable here and is specified per order. Colour, closure, length, label and packaging are made to order as with every other cut.
This is a strong private-label SKU because it sells on a clear, photographable benefit rather than on price.
Fit notes
The heavier fabric has less stretch, so the diameter measurement matters more than on the standard cut. Measure the tube at the cuff and order against it.
For slim or heated tubing, the same heavier fleece is available in those diameters.
Sourcing and ordering
MOQ: varies by product, size and colour - all quantities negotiable. Typical bands for this family run from 100 to 1000 pcs.
Lead time: varies by product and order size - confirmed in your offer and negotiable. Rush orders can be arranged.
Send us your target specification, quantity and market, and we will come back with pricing and a production plan.
CPAP Hose Cover is the sleep-therapy accessory line of a Shenzhen manufacturer with 16 years in hook-and-loop and soft-goods production, supplying OEM/ODM programmes for distributors, sleep clinics and therapy brands worldwide.
Frequently asked questions
Is the heavier version much bulkier on the bed?
It is noticeably thicker in the hand but only marginally bulkier on the tube. Buyers who want the lowest profile usually choose the standard weight instead.
Does a heavier cover reduce noise more?
In practice yes: the thicker pile absorbs more of the rub and rattle of the tube against a headboard or frame.
Can we specify the fabric weight ourselves?
Yes. Fabric weight is a specification variable; tell us the handling you want and we will propose a weight and confirm it with the sample.
Does this cover need a prescription or carry a medical claim?
No. A hose cover is a comfort accessory, not a medical device. It needs no prescription, it is commonly FSA/HSA eligible in the United States, and it makes no therapeutic claim - it does not treat sleep apnoea and it does not change therapy pressure.
What compliance documentation can you supply?
Materials can be supplied with REACH and RoHS test reports on request, and the factory operates an ISO 9001 quality system. Tell us the market you are importing into and we will confirm which documents it requires before the order is placed.
Why source this product with us
- Factory-direct pricing - Buy from the manufacturer rather than a trading company, with no middleman markup on sleep-therapy accessories.
- One-stop customisation - Closure, dimensions, fleece weight, colour and packaging handled from sample to mass production in a single factory.
- Low-risk trial - A flexible first order and 1-10 pcs pre-production samples, so you can validate the market before committing to a programme.
- Verified compliance - An ISO 9001 quality system and materials that can be supplied with REACH and RoHS test reports on request. Hose covers are comfort accessories, not medical devices: they need no prescription and do not alter therapy pressure.
- Reliable delivery - On-time production schedules, EXW / FOB / DDP terms, and a reply to every enquiry within 24 hours.
Who it is for: DME distributors, sleep clinics, therapy brands and e-commerce sellers building a supply line for sleep-therapy comfort accessories.
B2B buyer's guide: sourcing fleece hose covers
If you are sourcing hose covers for a DME distributor, a sleep clinic or an online therapy store, these are the points that decide whether a supply relationship works long term.
- Match the length to the run, not to the machine - The cover length has to cover the run from the outlet to the mask connector. Buying the next length up and letting it bunch shows up later as fit complaints.
- Settle the diameter before the decoration - Standard tubing is 22 mm, slim tubing around 15 mm, and heated tubing is thicker at the cuff. Getting the diameter wrong is the one error a colour programme cannot compensate for.
- Choose the closure by who fits it - A zipper suits the user who fits the cover with the tube connected; hook and loop suits programmes competing on the lowest landed cost. Both run on the same line, so the choice is a commercial one.
- Decide washability claims early - Machine washability is a real selling point and it fixes the fleece weight and the binding method, so it needs settling before sampling rather than after.
How ordering works
- Send your requirement - Tell us the product, quantity, target market, branding and packaging. Include your artwork if you have it - the enquiry form on this page reaches our export team directly.
- Quotation and specification - We reply within 24 hours with a quotation, MOQ and a written specification so both sides work from the same document. Pricing is quoted per project and confirmed in writing.
- Samples before production - We supply 1-10 pcs pre-production samples, typically in 5-7 days. Nothing goes to mass production until you approve the sample in writing.
- Production and quality control - Multi-point in-line and final inspection against the approved sample, with an inspection report issued before shipment.
- Shipment and documentation - We arrange EXW, FOB or DDP terms with the freight and customs documentation your market needs, and send shipping documents as soon as the goods are loaded.
- Repeat orders - Your approved sample and specification are kept on file, so repeat orders are produced to the same standard without restarting development.
Customisation and private label
- Logo and branding - Woven labels, printed logos, embroidery, heat transfer and custom hangtags.
- Private label - The product ships under your own brand, with your artwork on the product and the packaging.
- Colour and material - Colour matching to your palette, and fleece weight, pile or lining upgrades where the specification calls for them.
- Dimensions - Length, diameter and closure position made to your measurement rather than to a standard cut, including sizes outside this range.
- Packaging - Polybag, header card, retail box or carton configuration to your requirement, including barcodes for retail and clinic-pack labelling.
Send your specification through the enquiry form and our export team will come back within 24 hours with pricing, MOQ and a production plan.