Sand 8 ft Colour-Matched Fleece Hose Cover
Category: hose-covers
Commercial facts
| Price | Negotiable, quoted per project |
|---|---|
| MOQ | Varies by product, inquire for exact quantity |
| Customization | OEM / ODM |
| Lead time | Confirmed per project, rush orders negotiable |
Description
A soft fleece sleeve that wraps the breathing tube over a 8 ft run. It insulates the tube against condensation, takes the rub and rattle out of the tube, and keeps dust and pet hair off the surface. The hook and loop closure means it goes on with the tube already connected to the machine, and this cut is sized for standard tubing, measured at the outside diameter.
Key features
- Fits the tube, not the machine - Cut for a 8 ft run over standard 22 mm tubing, with a small excess so the tube can bend inside the sleeve instead of pulling the cover tight.
- Passive condensation control - The fleece slows heat loss along the tube so less moisture condenses in the low points of the run - the effect users notice as less gurgling near the mask.
- Closure you can fit in seconds - The hook-and-loop closure means the cover goes on with the tube already connected to the machine, which is how most users actually fit it.
- Machine washable - Cold gentle cycle and air dry. The sleeve keeps its pile and its colour across repeated washes, which matters for a part that is laundered regularly.
- Noise and contact comfort - It takes the plastic-on-fabric rattle out of the tube and keeps dust and pet hair off the surface it touches.
Product specification
| Cover length | 8 ft (2.44 m) finished; cut with a small excess so the tube can bend inside the sleeve |
|---|---|
| Fits tube | Standard 22 mm outside diameter |
| Closure | hook-and-loop closure tape, hardware colour matched to the fabric |
| Fabric | Double-sided polyester fleece, dye-lot controlled |
| Insulation | One fleece layer; passive insulation only |
| Colour | Sand as standard; other colours matched to a supplied swatch |
| Care | Machine washable, cold gentle cycle, air dry |
| Packing | Poly bag, header card, retail carton or bulk carton made to order |
Commercial terms
| MOQ | Set per programme - varies by product family and customisation level |
|---|---|
| Customization | Logo, colour, size, material, packaging |
| Samples | 1-10 pcs pre-production; sample cost refundable against the first bulk order |
| Trade terms | EXW / FOB / DDP on request |
Why buyers stock this cut
A 8 ft run is one of the four lengths that covers almost every home setup, and standard 22 mm is a common diameter in replacement and accessory programmes. Stocking the length and diameter together is what lets a distributor answer a fit question without opening a specification sheet.
The hook and loop version is dyed to a supplied reference so it can match a brand range, which is why it tends to sit at the front of a comfort-accessory range rather than the back of it.
How it works
Warm humidified air cools as it travels down a bare tube. Once the tube wall drops below the dew point of the air inside, moisture condenses and collects at the low points of the run, which is what users experience as gurgling or a wet hiss near the mask.
Fleece is passive insulation: it slows the rate at which the tube loses heat, so the tube wall stays closer to room temperature and less moisture forms. It does not heat the tube and it does not change therapy pressure - the cover sits on the outside of the tube only.
Construction and materials
Double-sided polyester fleece, dye-lot controlled holds its pile after repeated washing, takes colour evenly across a bulk run and is stable enough to carry a hook and loop closure without the edge waving.
The long edge is bound and the seam is closed, so the sleeve does not fray or shed pile into the tube area. Closure tape and hardware are colour matched to the fabric unless a contrast hardware colour is specified.
OEM and ODM options
Made to order on: cover length and diameter, closure type and hardware colour, fabric weight and pile, colour matched to a swatch, stitching and seam finish, then label and packaging.
ODM support covers the specification itself - if you are building a private-label range and have not fixed the construction, we can propose a fleece weight, closure and length set for your market and price band, then sample it.
Fit notes
Match the cover to the tube, not to the machine. Two figures decide the part: the length of the run from the outlet to the mask connector, and the outside diameter of the tube at the cuff.
Standard tubing measures 22 mm across. Heated tubing is thicker at the cuff and slim tubing is around 15 mm - both use a different cut rather than a 8 ft 22 mm one.
Sourcing and ordering
MOQ: varies by product, size and colour - all quantities negotiable. Typical bands for this family run from 100 to 1000 pcs.
Lead time: varies by product and order size - confirmed in your offer and negotiable. Rush orders can be arranged.
Send us your target specification, quantity and market, and we will come back with pricing and a production plan.
CPAP Hose Cover is the sleep-therapy accessory line of a Shenzhen manufacturer with 16 years in hook-and-loop and soft-goods production, supplying OEM/ODM programmes for distributors, sleep clinics and therapy brands worldwide.
Frequently asked questions
Does a 8 ft cover fit a run that has to be pulled tight?
The sleeve is cut slightly long so the tube can bend inside it. If your run is stretched straight past 8 ft, order the next length up rather than pulling this one tight.
Will the closure scratch the bedding or the tube?
The zipper is a soft-tape type with a small pull and it sits flat once closed; the hook and loop version has no metal at all along the length. Neither exposes a hard edge to the bedding.
Can the colour be matched to our packaging?
Yes. Send a swatch, a pantone reference or a packaging proof and we will match the fleece to it and confirm the match at sampling.
Does this cover need a prescription or carry a medical claim?
No. A hose cover is a comfort accessory, not a medical device. It needs no prescription, it is commonly FSA/HSA eligible in the United States, and it makes no therapeutic claim - it does not treat sleep apnoea and it does not change therapy pressure.
What compliance documentation can you supply?
Materials can be supplied with REACH and RoHS test reports on request, and the factory operates an ISO 9001 quality system. Tell us the market you are importing into and we will confirm which documents that market requires before the order is placed.
Why source this product with us
- Factory-direct pricing - Buy from the manufacturer rather than a trading company, with no middleman markup on sleep-therapy accessories.
- One-stop customisation - Closure, dimensions, fleece weight, colour and packaging handled from sample to mass production in a single factory.
- Low-risk trial - A flexible first order and 1-10 pcs pre-production samples, so you can validate the market before committing to a programme.
- Verified compliance - An ISO 9001 quality system and materials that can be supplied with REACH and RoHS test reports on request. Hose covers are comfort accessories, not medical devices: they need no prescription and do not alter therapy pressure.
- Reliable delivery - On-time production schedules, EXW / FOB / DDP terms, and a reply to every enquiry within 24 hours.
Who it is for: DME distributors, sleep clinics, therapy brands and e-commerce sellers building a supply line for sleep-therapy comfort accessories.
B2B buyer's guide: sourcing 8 ft fleece hose covers
If you are sourcing this cut for a DME distributor, a sleep clinic or an online therapy store, these are the points that decide whether a supply relationship works long term.
- Match the length to the run, not to the machine - A 8 ft cover suits a 8 ft run from the outlet to the mask connector. Buying the next length up and letting it bunch is a common first-order mistake, and it shows up later as fit complaints.
- Settle the diameter before the decoration - Standard tubing is 22 mm, slim tubing around 15 mm, and heated tubing is thicker at the cuff. Getting the diameter wrong is the one error a colour programme cannot compensate for.
- Choose the closure by who fits it - A zipper suits the user who fits the cover with the tube connected; hook-and-loop suits programmes competing on the lowest possible landed cost. Both are produced on the same line, so the choice is a commercial one.
- Decide washability claims early - Machine washability is a real selling point in this category. It also fixes the fleece weight and the binding method, so it needs to be settled before sampling rather than after.
How ordering works
- Send your requirement - Tell us the product, quantity, target market, branding and packaging. Include your artwork if you have it - the enquiry form on this page reaches our export team directly.
- Quotation and specification - We reply within 24 hours with a quotation, MOQ and a written specification so both sides work from the same document. Pricing is quoted per project and confirmed in writing.
- Samples before production - We supply 1-10 pcs pre-production samples, typically in 5-7 days. Nothing goes to mass production until you approve the sample in writing.
- Production and quality control - Multi-point in-line and final inspection against the approved sample, with an inspection report issued before shipment.
- Shipment and documentation - We arrange EXW, FOB or DDP terms with the freight and customs documentation your market needs, and send shipping documents as soon as the goods are loaded.
- Repeat orders - Your approved sample and specification are kept on file, so repeat orders are produced to the same standard without restarting development.
Customisation and private label
- Logo and branding - Woven labels, printed logos, embroidery, heat transfer and custom hangtags.
- Private label - The product ships under your own brand, with your artwork on the product and the packaging.
- Colour and material - Colour matching to your palette, and fleece weight, pile or lining upgrades where the specification calls for them.
- Dimensions - Length, diameter and closure position made to your measurement rather than to a standard cut, including sizes outside this range.
- Packaging - Polybag, header card, retail box or carton configuration to your requirement, including barcodes for retail and clinic-pack labelling.
Send your specification through the enquiry form and our export team will come back within 24 hours with pricing, MOQ and a production plan.